<VV> Carb Balance Tool

[Ron]

OK, but as it starts up, it's uneven, and all the liquid gets sucked into 
one carb and ruins your engine.  Happy Easter!

RonH
(pure speculation)

----- Original Message ----- 
From: <PatioMatt at aol.com>
To: <virtualvairs at corvair.org>
Sent: Monday, March 24, 2008 1:55 PM
Subject: Re: <VV> Carb Balance Tool


> When all else fails.....including your bank account...
>
> Go to WalMart... buy the 6 ft of 1/8"  Fish tank tubing  and some  colored
> mouthwash.
>
>
> Fold the tube in 1/2.....  add M-W  to a level of 6" on either  side
>
> Using Sticky tape or? ,  hang this  liquid filled part of  the tube from 
> your
> engine lid....so that it forms a "U" [ legs as vertical as  possible ].
>
> Connect the ends to the Carb's  Choke pulloff ports...
>
>
> Liquid should be EVEN on each side!
>
> Start engine [ HOT Engine  with chokes off ]
>
> Now you can adjust until the liquid stays  EVEN...
>
> This is called a "U-tube"...used in Laboratories  for decades before
> Electronics!
>
>
>
> Matt  Nall
> All Vairs!
> _http://members.aol.com/patiomatt_ (http://members.aol.com/patiomatt)
> somewhere  between Sea Mountain and Coos Bay.  OR.
>
>
>
>
>
> **************Create a Home Theater Like the Pros. Watch the video on AOL
> Home.
> (http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>