<VV> Headlight Switch removal

Sethracer at aol.com Sethracer at aol.com
Tue Mar 25 01:39:31 EDT 2008


 
In a message dated 3/24/2008 8:28:37 PM Pacific Daylight Time,  
ed_dowds at hotmail.com writes:

Disconnect battery.
Turn headlights on.
Tape a dime to your index  finger.
Reach behind the dash and push on the button on the switch with the  dime.
Pull the shaft out of the switch.
Ed



Cheapskates use a penney! PS - Don't pull on the shaft while pushing  on the 
top button. Move the shaft to the turn-on-the-headlights position,  then push 
on the button, then pull out the shaft. (If you keep applying outward  pre
ssure on the shaft, it makes it hard to depress the button. Remember, this  leaves 
the headlights in the ON position. That is a second reason to disconnect  the 
battery first. - Seth



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)


More information about the VirtualVairs mailing list