<VV> Dog Dish Hubcaps

Ron ronh at owt.com
Fri Mar 28 19:17:58 EDT 2008


There are three nubs or bumps on the wheels that accept these caps.  I put a 
little lubricant on each nub and hook the cap over two of them.  Then rotate 
the cap until you find the best place to push it over the third bump.  The 
caps are never perfectly round so an optimum place will show up.  Then hold 
it at that spot and tap the edge (only) of the cap right where that third 
nub is with a good rubber hammer.  It will usually pop on without any dents 
in the cap.
RonH

----- Original Message ----- 
From: "John Sweet" <jasvair at certainty.net>
To: "Tills" <tillzachman at comcast.net>; <virtualvairs at corvair.org>
Sent: Friday, March 28, 2008 3:21 PM
Subject: Re: <VV> Dog Dish Hubcaps


> You need 60-61 rims to use the dog dish caps.
> John Sweet
> ----- Original Message ----- 
> From: "Tills" <tillzachman at comcast.net>
> To: <virtualvairs at corvair.org>
> Sent: Friday, March 28, 2008 5:55 PM
> Subject: Re: <VV> Dog Dish Hubcaps
>
>
>> Hi, Can anyone give me the trick to installing Dog dish hub caps? It is 
>> on
>> a
>> 62 Monza I have 13” rims and using the dome hubcaps that say Chevrolet
>> Corvair. I am tired of denting hubcaps. OR am I fighting a battle because
>> they won’t work to begin with.   Thanks Steve
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG.
>> Version: 7.5.519 / Virus Database: 269.22.1/1348 - Release Date: 
>> 3/28/2008
>> 10:58 AM
>>
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
>> the property
>> of the writer, please attribute properly. For help,
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
> 




More information about the VirtualVairs mailing list