<VV> Valve adjusment

corvairduval at cox.net corvairduval at cox.net
Thu Apr 23 15:53:55 EDT 2009


I rotate the push rod with two fingers to find the point where the
clearance is out of the rocker. If you can rotate the rod easily, there is
still clearance. There should be a very abrupt change in torque needed to
rotate the rod at the zero clearance point.

Frank DuVal

Original Message:
-----------------
From: Harry  Yarnell hyarnell1 at earthlink.net
Date: Thu, 23 Apr 2009 15:16:38 -0400
To: jhouston001 at cfl.rr.com, virtualvairs at skiblack.com
Subject: Re: <VV> Valve adjusment


No. Just don't press (force) the pushrod down. Your starting point is just 
when the clearence is out of the rocker.

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Jim Houston" <jhouston001 at cfl.rr.com>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Thursday, April 23, 2009 3:00 PM
Subject: <VV> Valve adjusment


> I'm going to adjust my valves before I reinstall the engine in the car.
> It's been sitting since last August.  Will the resulting "drain down" of
> the lifters affect the cold, non-running adjustment?
>
> Thanks in advance,
>
> Jim Houston
> '65 Monza coupe
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights
are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________

--------------------------------------------------------------------
mail2web LIVE – Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE




More information about the VirtualVairs mailing list