<VV> Spyder Dash Powder Coating

[Western Canada CORSA]

George is right.  One suggestion for a "high metal content filler" is
original 24hour cure time JB Weld.

Our gang here in Victoria invested in a Caswell DIY powdercoating kit.  Best
$130 we ever spent!  It's under $20 for a POUND of powdercoat, and you can
do A LOT of stuff with that.

Regards,
Joel

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of George Jones
Sent: Sunday, July 05, 2009 11:11 AM
To: ohareck at aol.com
Cc: virtualvairs at corvair.org
Subject: Re: <VV> Spyder Dash Powder Coating


In my limited experience with powder coating, and assuming your parts are
pitted, I would recommend filling all pits with some type of high metal
content filler. Powder coating is a wonderful thing, but it doesn't hide
imperfections well.


George Jones
--------------------------------
Eastern Division Director, Corvair Society of America (CORSA) Performance
Corvair Group Central Florida Corvair Club (Since 2009) Tidewater Corvair
Club (since 1987) Central Virginia Corvair Club (since 2006) Corvair Society
of America (CORSA)(since 1987) '65 Monza Crown V8 Convertible '66 Monza
Coupe Custom


On Sun, Jul 5, 2009 at 9:38 AM, <ohareck at aol.com> wrote:

> We are restoring our 65 Greenbrier and I am putting a Spyder Dash in 
> for more gauges. Both Dash surfaces that I have are less than perfect 
> and I was thinking about trying to powder coat them. Has anyone tried 
> this? Any suggetions would be appreciated. Charlie  
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property of the writer, please attribute properly. For help, 
> mailto: vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________