<VV> top block cover and mag fan removal

[Harry Yarnell]

Hmm. Remove the four screws from the bearing hub, and it should come right 
off. May have to wiggle it if the fan's corroded to the hub.
I also assume you've removed the top sheet metal...

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "chris mann" <cfmann at yahoo.com>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Friday, March 20, 2009 10:46 AM
Subject: <VV> top block cover and mag fan removal


>I reviewed the shop manual about separating the magnesium fan blade from 
>the top block cover. Being as it is my first time screwing around with this 
>part, can you guys share any tips on separating these safely?
> -chris mann
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________