<VV> Engine Tilt

[jvhroberts at aol.com]

 Could be a forward engine mount is in trouble. Also, check to make sure something isn't bent, like the body! 

How level the drivetrain is, is determined by the forward mounts, and all the bracketry that goes with them. The front tranny bracket, the subframe the mounts bolt to, etc. 


 


 

-----Original Message-----
From: Ken Lundy <klundy at optonline.net>
To: Virtual Vairs <virtualvairs at corvair.org>
Sent: Sun, 31 May 2009 9:04 am
Subject: <VV> Engine Tilt










The engine in my 64 Convertible is slanted down slightly on the drivers
side. 
It has been this way since I bought the car in 2001.
Should I be concerned about this?
Is there some way of adjusting it so the engine is level?
Thanks in advance for your advice.
Ken Lundy
NJ
64 Monza Convertible
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________