<VV> oil subject again

[Mark Durham]

Mark, there was a thread here not too long ago where someone was using Brad
Penn oil and he gave the PPM and it was acceptable. Or you can get the
Amsoil 10-40, which also has the higher ZDDP.

In my book I've decided just to use Mobil 1 and put in the additive. Its
just easier to go to Wally's world for the oil and filter (I have an
adapter) and have Clarks send me a couple bottles of the ZDDP every so
often, I'm buying parts from them all the time anyway.

I did a lot of searching a year ago and a Shell rep told me the Rotella T
full synthetic was OK, which it was, then they stopped producing it that
way! So, since the oil companies don't tell you what they are doing, the
ZDDP additive is a sure thing with a good synthetic oil!  Mark Durham

On Sat, Apr 10, 2010 at 3:43 PM, <Markpowhatan at aol.com> wrote:

> Today I attended a car show and a person was selling "Brad Penn" brand
> motor oil, which according to the rep, contained the oil additives needed
> for
> use with flat tappet engines, such as discussed on Virtual Vairs in  the
> past.  What he showed me was a synthetic blend 10-30.  Has anyone  used
> this
> brand before, and with good results?   Thanks...Mark  Francis   63 Spyder
> Powhatan,  Va.
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>