<VV> Setting the timing

[Harry Yarnell]

You plug the hose disconnected from the distributor. BUT, technically you 
shouldn't have to. There should be no vacuum at the advance unit at hot 
idle. Shouldn't be...

Harry Yarnell
Perryman Garage and Orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Stephen Upham" <contactsmu at sbcglobal.net>
To: <virtualvairs at corvair.org>
Sent: Monday, May 31, 2010 6:05 PM
Subject: <VV> Setting the timing


> Quick question that is not obvious in the instructions in the '65
> manual.  Do you remove the vacuum advance hose from the right carb and
> plug the hose there or from the vacuum advance on the distributor and
> plug that end of the hose?
>
> Stephen U
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>