<VV> Late Model Light Switch

shortle shortle556 at earthlink.net
Sun Nov 14 15:32:48 EST 2010

If "the switch is not putting power on the circuit that goes to the panel lights" it sounds like you have a bad headlite switch. 
Timothy Shortle in Durango Colorado 

-----Original Message-----
>From: John Howell <32chevy at 0306.org>
>Sent: Nov 14, 2010 1:03 PM
>To: Chris & Bill Strickland <lechevrier at earthlink.net>
>Cc: VV <virtualvairs at corvair.org>
>Subject: Re: <VV> Late Model Light Switch
>That screw is in and giving a good ground.  The switch is not putting power on the circuit that goes to the panel lights. The green wire that goes from the plug that connects to the light switch goes to the fuse block thru the three amp fuse then to the panel lights thru two grey wires, all of this is in perfect working order.
>All the indicator lights are working fine.
>  ----- Original Message ----- 
>  From: Chris & Bill Strickland 
>  To: 32chevy at 0306.org 
>  Sent: Sunday, November 14, 2010 1:24 AM
>  Subject: Re: <VV> Late Model Light Switch
>  There is a highly problematic ground screw for the late model instument pannel that causes all sorts of ip light problems. I'm mostly an early type guy, and do not recal this screw's location from my Corsa driving days, so sorry -- somewhere on the lower edge of the cluster.
>  Godspeed!
>  Bill
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________

More information about the VirtualVairs mailing list