<VV> LM gas guage

[Frank Ness]

Okay, I'll admit my ignorance. What is an IPC?
Frank



----- Original Message ----
From: Harry Yarnell <hyarnell1 at earthlink.net>
To: Michael Kovacs <kovacsmj at sbcglobal.net>; VV <virtualvairs at corvair.org>
Sent: Tue, October 26, 2010 11:03:33 AM
Subject: Re: <VV> LM gas guage

Ground is missing. Try tightening the Phillps screws holding the bottom of
the IPC to the cross-car rail.

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Michael Kovacs
Sent: Tuesday, October 26, 2010 1:11 PM
To: VV
Subject: <VV> LM gas guage

'69 gas guage goes to way past full (3 o'clock position).
The guage some times swings slowly back to normal full (The tank is full) .
Has 
someone had this problem? How to check/solve?
I assume there are two extreme situations:
A. Either there is no power coming through the wiring to the  guage.
B. Or there is a short on the wiring,  delivering all power to the
guage. MIKE 
KOVACS 

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________