<VV> Steering box lube

Clark Hartzel chartzel at comcast.net
Sun Sep 12 01:56:46 EDT 2010


Back in my younger and more foolish days, I thought I would grease my box by
putting a zerk fitting in the pipe plug hole.
I did get some grease in there before I blew out the pitman shaft seal.  It
was not fun trying to get the seal back in.
I haven't lubed a box lately but I would use gear oil and STP mix as someone
suggested. 
If you use a zerk fitting and a grease gun, saw a slot thru the threads on
the fitting to relieve pressure. 
When the grease squirts out of the threads you are full.
Clark Hartzel


More information about the VirtualVairs mailing list