<VV> valve train noise

[BobHelt at aol.com]

In a message dated 9/22/2010 4:05:15 A.M. US Mountain Standard Time,  
N2VZD at aol.com writes:

the  valve train gear type noise is from the center rear of the motor ,   
using stethoscope from top or bottom. of course i have adjusted valves  
running  
hot , (all new stuff , grooved mated etc etc ) and valve  geometry looks  
ok.
i will tear into it this winter after we are done  with car club tours then 
 
report back with my  findings.



Tim, 
Consider that weak (or improperly installed) valve springs can cause this  
problem.
Regards,
Bob Helt