<VV> start solenoid

[J R Read]

Do a search on "testing a starter solenoid".  You'll find several 
descriptions and even some videos.

Later, JR


----- Original Message ----- 
From: "Ramon Rodriguez III" <corvairgrymm at gmail.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, April 19, 2011 3:24 PM
Subject: Re: <VV> start solenoid


> Let's do it this way.  How can I test the solenoid for proper operation
> (with it off the starter in my hand)?  If the solenoid is working 
> correctly
> than the starter must have hung up and not allowed the solenoid to pull 
> back
> until I disconnected the battery, which makes sense.  Strange thing is the
> same starter was working fine before I pulled it out, maybe just bad luck
> when I put it in?  Right now the starter is out of the car.
>
> I'd just like to test the solenoid before I put it back in.
>
> Ray R.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________