<VV> Lower Left Side

[Byron Comp]

Les,
 
My '64 Vert "displayed" the same abnormality, although the lower left side shroud and heat-vent door looked like it had been backed over a high curb at some time. I replaced all bushings, shocks, and transmission mounts, along with the rear engine mount and after I "re-hung" the drivetrain, it now looks straight again.
 
Byron Comp
'64 Monza Vert
Gainesville, FL
 
>
>Message: 1
>Date: Thu, 11 Aug 2011 08:21:48 -0500
>From: Les Honke <corvair at mymts.net>
>Subject: Re: <VV> Engine hangs lower on left side... seriously
>To: <thesuperscribe at yahoo.com>, <jvhroberts at aol.com>,
>    <ricknorris at suddenlink.net>, Les Honke <corvair at mts.net>,
>    <virtualvairs at corvair.org>
>Message-ID: <BLU155-W48E6A72A61102BE30115A0A7220 at phx.gbl>
>Content-Type: text/plain; charset="iso-8859-1"
>
>
>Thanks for all the responses... I knew when I posted it that there was a risk of "possible scattered humour"! ;-)
>
>Body looks straight and there were no signs of rear end collision when I had the bodywork done. 
>
>I wonder if I can just put a couple washers between the right side crossmember and the transmission mount to drop the right side a little...
>
>Les
>