<VV> valve adjustment

[Dennis Pleau]

Something is wrong.  Make sure the pushrod is in the dimple in the center of
the lifter.  

dp

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Bruce Alexander
Sent: Tuesday, August 23, 2011 2:09 PM
To: virtualvairs at corvair.org
Subject: <VV> valve adjustment

I am re-assembling my 64-110 eng. when I set the valve lifters initial
setting. (before starting) no. 4 intake  stops  at zero lash,( pushrod just
stopped spinning) with no threads showing above the nut. the other studs all
show a few threads showing above the nut.  Will this self adjust when I
start and adjust the valves while running, or do I have a problem?
...,Bruce