<VV> '61 doors removal

[Ron]

I used an impact wrench with heavy duty bits on mine.  As I recall, one on a 
rear door got chewed up and I cut a slot in it with a 1/16" rubber cutting 
wheel and got it loose with a big T driver.  Be sure to douse them with a 
good penetrating oil well ahead of time.
RonH

----- Original Message ----- 
From: "Ken Clark" <kcvair at hotmail.com>
To: <virtualvairs at corvair.org>
Sent: Thursday, June 30, 2011 10:45 AM
Subject: <VV> '61 doors removal


>
> Is there any easy/good way to remove the doors off a '61 Lakewood.  The 
> fronts appear to mave bolt heads on the inside of the car and the heater 
> hose would have to be removed.  The rear doors have phillips head bolts on 
> lower hinge.  We got one bolt loose and the next step may be drilling the 
> other 2 out.  any suggestions on something that has been in place for 50 
> years.  Ken Clark
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>