<VV> 4 speed crossmember

jvhroberts at aol.com jvhroberts at aol.com
Sat May 7 10:32:20 EDT 2011


 I would think any 61-65 4 speed front bracket (if that's what you're calling the crossmember) would work. 65 brackets simply wouldn't use the toe rod holes. 

 

John Roberts
 

 

-----Original Message-----
From: PETER INMAN <monza1965 at yahoo.com>
To: virtual vairs <virtualvairs at corvair.org>
Sent: Sat, May 7, 2011 8:10 am
Subject: <VV> 4 speed crossmember


I`m  going to a old junkyard today. My 61 Rampside has a 3 speed and I`m wanting 



to change it over to a 4 speed. There is a early Monza there and I`m wondering 

if its a 64 4 speed if the transmission cross member will work on a Rampside. 

Will it work? I have a 65 4 speed under the bench and am just gathering the 

parts needed to swap it over . Thanks for all help .

Pete Inman



65 Monza

61 Rampside

East Jordan Mi.

 _______________________________________________

This message was sent by the VirtualVairs mailing list, all copyrights are the 

property

of the writer, please attribute properly. For help, mailto:vv-help at corvair.org

This list sponsored by the Corvair Society of America, http://www.corvair.org/

Post messages to: VirtualVairs at corvair.org

Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 

 _______________________________________________


 


More information about the VirtualVairs mailing list