<VV> checkng engine/ transaxle

[Michael Kovacs]

Yokes are in and torqued. Better not leak, as new seals installed in Diff!

 MIKE KOVACS




________________________________
From: Daniel Monasterio <dmonasterio at hotmail.com>
To: Mike Kovacs <kovacsmj at sbcglobal.net>; VirtualVairs 
<virtualvairs at corvair.org>
Cc: fastvair at yahoogroups.com
Sent: Wed, April 11, 2012 6:12:22 PM
Subject: RE: <VV> checkng engine/ transaxle

 
No problem at all but, plug the holes where the shafts enter the differential, 
to avoid oil spillage.

Daniel


> Date: Wed, 11 Apr 2012 14:39:50 -0700
> From: kovacsmj at sbcglobal.net
> To: virtualvairs at corvair.org
> CC: fastvair at yahoogroups.com
> Subject: <VV> checkng engine/ transaxle
> 
> ...............  I just raised the Engine into the car with the replacement 
>trans-axle. I would 
>
> like to start the engine and run the trans-axle without the drive shafts or the 
>
> lower struts.........................
>