<VV> Fan belt tension

corvairduval at cox.net corvairduval at cox.net
Wed Apr 11 16:16:28 EDT 2012


Belt hum, fan hum, or bearing hum? Listen at idle and increased rpm with a
rubber hose at each part to see what is the sound you hear.

If you cannot repeat the noise doing this, it may be drivetrain related.
Countershaft hum?

Frank DuVal

Original Message:
-----------------
From: Bryan Blackwell bryan at skiblack.com
Date: Wed, 11 Apr 2012 15:54:54 -0400
To: 62vair at gmail.com, virtualvairs at corvair.org
Subject: Re: <VV> Fan belt tension


I assume you've taken the belt off briefly to verify it's really the belt. 
My first thought would be try a different brand of belt.  Second thought is
to run it a smidge looser or tighter to see if that changes things.  Also
check over the pulleys themselves for flaws.

--Bryan

On Apr 11, 2012, at 3:43 PM, Mark Durham wrote:

> ok all, I've got my tension set as described, loose enough to turn the
> fan, however, I have a belt relate hum at the same rpm in each of the 4
> gears. How do you cure that?
> Mark Durham

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________

--------------------------------------------------------------------
mail2web.com – Enhanced email for the mobile individual based on Microsoft®
Exchange - http://link.mail2web.com/Personal/EnhancedEmail




More information about the VirtualVairs mailing list