<VV> PG leak revisited again

[Bryan Blackwell]

You might try dusting the area with flour to help pinpoint the leak.  I'd be suspicious given what you've said that the fluid isn't coming from somewhere else and migrating to the lowest point.

--Bryan

On Dec 12, 2012, at 2:37 PM, Michael Kovacs wrote:

> There is no leak from above the gaskets. It is bone dry on the aluminum part. 
> The leak is on the rear of the seal on the drivers side. I made a short metal 
> reinforcing strap to go under the two bolts on that area and it seemed to slow 
> it down a bit.