<VV> Driveshaft length on 3-speed vs. 4-speed ?

[Charles Lee]

Correct-o-mundo ~ the "input shaft" is what I should have said ~ mea culpa !

 

I recall changing a 65 4-speed to a 66 Saginaw 4-speed and the brackets
needed to be changed to accommodate the longer box.

 

Good to know that the shaft is not an issue with the LLM (that's
Late-Late-Model) 4-speed, 

 

Thanks for the much-appreciated responses ~

Charlie

 

 

From: jvhroberts at aol.com [mailto:jvhroberts at aol.com] 
Sent: Monday, February 06, 2012 4:53 PM
To: chaz at properproper.com; virtualvairs at corvair.org
Subject: Re: <VV> Driveshaft length on 3-speed vs. 4-speed ?

 

If by driveshaft you mean input shaft, here's the scoop:
On 65s, the 3 speed shaft is shorter than the 4 speed shaft. 
On 66-69s the 3 and 4 speeds use the same shaft. 

 

John Roberts

 

 

-----Original Message-----
From: Charles Lee <chaz at properproper.com>
To: 'VirtualVairs' <virtualvairs at corvair.org>
Sent: Mon, Feb 6, 2012 7:34 pm
Subject: <VV> Driveshaft length on 3-speed vs. 4-speed ?

Is the driveshaft length on 3-speed shorter/longer/same length on LM 4-speed
?
 
Thanks !
Charlie
 
 
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the 
property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org <mailto:vv-help at corvair.org?> 
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________