<VV> Monza clock diode install

jvhroberts at aol.com jvhroberts at aol.com
Mon Feb 13 20:07:21 EST 2012


 Actually, Matt, putting the diode across the clock terminals won't do anything. The diode needs to dump the back EMF when the points open. So, the diode needs to either be a shunt across the coil or across the points. And the points end of the coil isn't accessible from outside the clock housing. 

 

John Roberts
 

 

-----Original Message-----
From: Matt Nall <patiomatt at aol.com>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Mon, Feb 13, 2012 6:23 pm
Subject: Re: <VV> Monza clock diode install


try this  for starters!  The diode goes between the Power lead and ground.  


http://corvaircenter.com/phorum/read.php?1,244564,244586#msg-244586 


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Patio
http://tinyurl.com/Matts-Tech-Pages







-----Original Message-----
From: James Cooper <cooperj123 at msn.com>


Does anyone have a link to instructions to install a radio shack diode in a LM 
Monza clock?  I have searched but not found it.Jim
 		 	   		  


 
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________

 


More information about the VirtualVairs mailing list