<VV> Valve adjusting sequence - apoplogy

aeroned at aol.com aeroned at aol.com
Sun Feb 26 10:49:04 EST 2012


Andy,

I can't remember the sequence either. The way I do it is one TDC adjust all of the valves. Then rotate the crank 360 degrees and adjust the valves that are loose.

Ned



-----Original Message-----
From: Kinzelman, Andy <akinzelm at greatnortherncorp.com>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Sun, Feb 26, 2012 7:13 am
Subject: <VV> Valve adjusting sequence - apoplogy


Guys,
 hope my earlier question will NOT start up the hot vs cold debate.  Cold is 
ow I do my adjustments and that is the info I need.
hanks,
ndy K.
_______________________________________________
his message was sent by the VirtualVairs mailing list, all copyrights are the 
roperty
f the writer, please attribute properly. For help, mailto:vv-help at corvair.org
his list sponsored by the Corvair Society of America, http://www.corvair.org/
ost messages to: VirtualVairs at corvair.org
hange your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________



More information about the VirtualVairs mailing list