<VV> Valve adjusting sequence - apoplogy

[Mark Durham]

>From my 61 manual, page 6A-53, #1 tdc, comp stroke and
adjust #1i, #1e, #3i, #5e, on rt bank, then #4e, #6i on left bank.
Turn crank counter clockwise to #2 tdc comp stroke and adjust #3e, #5i
on rt bank and #2i, #2e, #4i, #6e on left bank. Mark Durham

Sent from my Windows Phone
From: aeroned at aol.com
Sent: 2/26/2012 8:01
To: virtualvairs at corvair.org
Subject: Re: <VV> Valve adjusting sequence - apoplogy

BTW Terry Kalp showed me this method and it works great and is easy to
remember. That why I do it this way. Terry knows so much about these
little cars it would take decades to learn it all. I hope I have that
opportunity.

Ned



-----Original Message-----
From: aeroned <aeroned at aol.com>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Sun, Feb 26, 2012 9:49 am
Subject: Re: <VV> Valve adjusting sequence - apoplogy



ndy,
I can't remember the sequence either. The way I do it is one TDC adjust all of
he valves. Then rotate the crank 360 degrees and adjust the valves that are
oose.
Ned


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________