<VV> FC Heater Hose question

[shortle]

Hi Terry,
I just put heater hoses on my '64 (pretty original with 71,000 actual miles) and saw nothing like you describe. I did put an insulator on the left hose available from our vendors where it is very near the starter positive stud. I also put a plastic cap cover over the stud. Let us know what you figure out as I don't like how close they are to that stud. It can "short out" the wire, potentially catch fire, and/or put a hole in the hose reducing the efficiency of the heater. All of this I know you know.
Timothy Shortle in (cold, around 10 degrees right now)Durango Colorado 81301


-----Original Message-----
>From: tkalp at cox.net
>Sent: Jan 16, 2012 7:05 PM
>To: VirtualVairs at corvair.org
>Subject: <VV> FC Heater Hose question
>
>OK guys, putting my '61 Greenbrier back together. On the driver's side heater hose there was a loop with a tab that bolted to the body that helped hold the heater hose away from the starter and axle. Cleaned it all up but now can't figure out exactly where it attaches . . . can anyone help me out?
>
>T. Kalp
>Wichita, KS
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________