<VV> Electrical gremlins

[jvhroberts at aol.com]

 First place to check is how well grounded is the socket? That's been my big problem with LMs, the steel insert comes loose due to engine heat, slips, and there goes the ground!

 

John Roberts
 

 

-----Original Message-----
From: Stephen Till <still63 at att.net>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Thu, Jun 7, 2012 9:07 am
Subject: <VV> Electrical gremlins


I need help from someone who is well versed in a LM electrical. I do not have 
a RT rear brake light. I have a good ground along with a running light and turn 
signal but, No brake light. Bulb is good. Any Ideas? Thinking a bad socket bulb 
socket? I believe it feeds off the left side according to the schematic.
 Thank you-Stephen Till 
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________