<VV> Lifespan of standard ignition points

[J R Read]

Somewhat of a guess since I've not been keeping track.  On GM or ACDelco 
ones - probably 20,000 or better.  Anything else is pretty much of a 
crapshoot.

I do recall one instance where I changed out the points on the Rampside and 
within a week it was running VERY poorly to the point where (after a couple 
of more days) it refused to start.  Removed the China made points for Delco 
ones.  That was about a year ago (probably 3,500 - 5,000 miles) and all is 
still good in that department.

Later, JR


----- Original Message ----- 
From: "chuck mckinley" <cmckinley313 at verizon.net>
To: "VirtualVairs AA" <virtualvairs at corvair.org>
Sent: Sunday, March 25, 2012 2:03 PM
Subject: <VV> Lifespan of standard ignition points


> Just out of curiosity, what has been your experience as far as how long
> a set of standard points (Kettering ignition) will typically last
> (reference machine is '63 Monza 900, 80 hp 3-speed, only non-standard
> part of the ignition system is an Accel coil.) A few years ago I ran
> into problems when I failed to replace the condensor in the distributor,
> and a couple successive sets of points only lasted a few hundred miles
> each. After I put in a new condensor, that problem went away. I'm always
> tempted to switch to an Igniter but would just as soon not spend the
> money since I'm not having problems with the standard system.
>
>
> Chuck McKinley
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________