<VV> Ignition

Jason Cesana jacesana1 at verizon.net
Sun Apr 7 22:10:45 EDT 2013


Yes there is a L on the back. 

Jason Cesana
Sent from my iPhone

On Apr 7, 2013, at 9:44 PM, Lon Anderson <lonzovair at aol.com> wrote:

> As for keys, 60-66 ignition are all the same.... then the "letter" keys started in '67 and are different each year (on a rotating 4 year schedule) after that...
> See if there is a letter stamped into the neck, like "A" or "D"....
> Later,
> Lonzo
> -----Original Message-----
> From: J R Read <hmlinc at sbcglobal.net>
> To: Jason Cesana <jacesana1 at verizon.net>; virtualvairs <virtualvairs at corvair.org>
> Sent: Sun, Apr 7, 2013 9:23 pm
> Subject: Re: <VV> Ignition
> 
> Well, either I've not seen them all or your switch has enough ware that the 
> LM one works.  OR - both of these are possible?
> Later, JR
> 
> 
> ----- Original Message ----- 
> From: "Jason Cesana" <jacesana1 at verizon.net>
> To: "'J R Read'" <hmlinc at sbcglobal.net>; <virtualvairs at corvair.org>
> Sent: Sunday, April 07, 2013 8:19 PM
> Subject: RE: <VV> Ignition
> 
> 
> > Interesting. Perhaps my 60 had a late model ignition in it as I had one 
> > for
> > that car. Thanks JR.
> > Jason
> >
> > -----Original Message-----
> > From: J R Read [mailto:hmlinc at sbcglobal.net]
> > Sent: Sunday, April 07, 2013 9:16 PM
> > To: Jason Cesana; virtualvairs at corvair.org
> > Subject: Re: <VV> Ignition
> >
> > The one's I've seen as you describe only fit the LM ignition switch.
> > Later, JR
> >
> >
> > ----- Original Message ----- 
> > From: "Jason Cesana" <jacesana1 at verizon.net>
> > To: <virtualvairs at corvair.org>
> > Sent: Sunday, April 07, 2013 8:03 PM
> > Subject: <VV> Ignition
> >
> >
> >>
> >>
> >> Hey folks. I recently picked up an uncut key with the word CORVAIR
> >> inscribed
> >> on it. I was going to have it cut to match my latest Corvair a 64 Monza. 
> >> I
> >> checked the key before having it cut and it does not slide into the
> >> ignition. I checked the key to the one that works and they seem to match.
> >> Is
> >> the late models ignition similar but not exact to the earlies? This might
> >> help explain this. Thanks
> >>
> >>
> >>
> >> Jason Cesana
> >>
> > 
> 


More information about the VirtualVairs mailing list