<VV> Engine installation

Ken Clark kcvair at hotmail.com
Thu Dec 5 10:03:52 EST 2013

And be sure the clutch plate is in correctly and not reversed.  You only do that once because the motor has to come back out to get it right.  I know from experience many years ago.  Ken
> From: chartzel at comcast.net
> To: virtualvairs at corvair.org
> Date: Wed, 4 Dec 2013 14:09:35 -0500
> Subject: <VV> Engine installation
> Make sure the differential is level and the engine is level so they slide
> together smoothly.  Make some guide pins by cutting off the bolt heads on
> some 3/8-16 x 3" bolts and screw them into the threads several places.
> Engage the pins and slide the engine on.  This helps guide everything
> together without breaking the snout.  And don't forget to put the input
> shaft in first!
> Clark Hartzel
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________

More information about the VirtualVairs mailing list