<VV> Was Engine Installion Now Dreaded Snout Crack

Brian bmoneill at juno.com
Sun Dec 8 13:38:31 EST 2013


I took a chance.  Used JB weld and replaced the small-less than half of my pinky's nail.  Snanded it all down and replaced the seal and split ring.  We'll see.

---------- Original Message ----------
From: jvhroberts at aol.com
To: shortle556 at earthlink.net, bmoneill at juno.com, fastvair at yahoogroups.com,  VirtualVairs at corvair.org
Subject: Re: <VV> Was Engine Installion Now Dreaded Snout Crack
Date: Sat, 7 Dec 2013 13:30:38 -0500 (EST)

Agreed, if the engine is already out, you can remove the final drive with the tranny in place, and that ain't all that hard. And yes, use the steel one Clark's sells, much harder to break. Don't forget the heavy split washer, so you don't trash the seal. 

John Roberts

-----Original Message-----
From: shortle <shortle556 at earthlink.net>
To: Brian <bmoneill at juno.com>; fastvair <fastvair at yahoogroups.com>; VirtualVairs <VirtualVairs at corvair.org>
Sent: Sat, Dec 7, 2013 11:50 am
Subject: Re: <VV> Was Engine Installion Now Dreaded Snout Crack

Colonel, If you want to do it correctly, you know the answer. If you want to risk the outcome, you know the answer. If you have the engine already out, removing the transaxle is pretty darn quick and easy to remove and then split apart. I like doing things properly. I like driving my Corvairs long distance. My vote is do it correctly. Tell us your decision.Timothy Shportle in Durango Colorado 81301 -----Original Message----->From: Brian <bmoneill at juno.com>>Sent: Dec 5, 2013 3:46 PM>To: fastvair at yahoogroups.com, VirtualVairs at corvair.org>Subject: <VV> Was Engine Installion Now Dreaded Snout Crack>>Thanks to all for advice on the engine only installation.  Bad news--closer inspection as I was putting on throw out bearing showed a crack in the snout.  It looks like a piece could fall out if I touched it,  Crack extends 7/16 of an inch from end of snout.  Any fixes?  JB weld? Or am I faced with dropping the trans axle and having a new snout installed?  I'm afraid o f the answers!>____________________________________________________________>Do THIS before eating carbs &#40;every time&#41;>1 EASY tip to increase fat-burning, lower blood sugar & decrease fat storage>http://thirdpartyoffers.juno.com/TGL3131/52a1027adaba627a77c2st02vuc> _______________________________________________>This message was sent by the VirtualVairs mailing list, all copyrights are the property>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org>This list sponsored by the Corvair Society of America, http://www.corvair.org/>Post messages to: VirtualVairs at corvair.org>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs > _______________________________________________ _______________________________________________This message was sent by the VirtualVairs mailing list, all copyrights are the propertyof the writer, please attribute properly. For help, mailto:vv-help at corvair.orgThis list sponsored by the Corvair Society of America, http://www.corvair.org/Post messages to: VirtualVairs at corvair.orgChange your options: http://www.vv.corvair.org/mailman/options/virtualvairs  _______________________________________________
____________________________________________________________
Odd Carb-Hormone Trick
1 EASY tip to increase fat-burning, lower blood sugar & decrease fat storage
http://thirdpartyoffers.juno.com/TGL3131/52a4bcfbe37d43cfb3babst02vuc


More information about the VirtualVairs mailing list