<VV> Deves rings?

[BobHelt at aol.com]

Bryan,
This may work to break in an engine, but I am greatly concerned that this  
practice will not bring the oil temp up to a point where it will flow thru 
the  filter.  Not getting the oil to flow thru the filter means gobs of metal 
 particles circulating thru the engine. It would seem like this would keep 
the  filter bypass open and never allow the filter to work.
Regards,
Bob Helt
 
 
In a message dated 3/28/2013 8:08:05 P.M. US Mountain Standard Time,  
62vair at gmail.com writes:

. Also,  if you do the initial break in cold by starting and
running at 1200 to 1500  rpm and rum for 3 min and shut off, let cool,
do it again, let it cool,  then on the third start set timing and idle,
then go  drive.