<VV> Advice needed: CHEAP oil drip pans

[Harry Smith]

No Joe!
Say it isn't so!
A CHEAP Corvair owner?!
Harry Smith
1963 Rampside
Coral Springs, FL



On Wed, Sep 4, 2013 at 2:00 PM, <Taruffi57 at aol.com> wrote:

> Since my new garage floor looks so purty.....I would rather that some of my
>  "treasures" not foul it up with their droppings. (NOT my Corvairs).    The
> '62 Pontiac is the worst offender. (it rejects ALL fluids put into it)
>
> Floor is epoxy in the lift area, and 3 coats Sherwin-Williams concrete
> paint - topped with a sealer on the other 80%.  Looking for a cheap way to
> slip something under cars as needed.  Something that will not bleed
> through  to
> the floor.  I tried 30 lb. roofing felt and oil went straight through  it.
> Same for roofing shingles.  Hey.  I had all that lying  around anyway.
> What would be nice is to have about 3 oil catchers that I  could just use
> as
> needed, until I can deal with the offenders.
>
> All advice considered and appreciated.  Remember, this must pass  the
> Corvairisti mantra.  We are  CHEAP.
>
> Joe Dunlap
> Cen. Florida
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>



-- 
"THERE IS NO TRY,
THERE IS ONLY DO
OR DO NOT"