<VV> 62-63 brake parts

[Mark Durham]

the shoe guide plate is not used on the 62-64 cars. If your 63 car had
them, they are not necessary. Look at page 22 used in Clarks specialty
catalog.
Mark Durham
62 coupe

Sent from my Windows Phone
------------------------------
From: Ramon Rodriguez III
Sent: 9/19/2013 19:38
To: Mark Durham
Cc: virtualvairs at corvair.org
Subject: Re: <VV> 62-63 brake parts

Alright, I admit my description was crude to the point of being
indecipherable.

The missing part is the "shoe guide plate" according to the shop manual, I
need at least one pair for the 63 rear brakes.  I know the pair from the 62
brakes must be here somewhere but I can't find them.  For further
clarification the "shoe guide plate" is the part that goes on the anchor
pin (the big pin at the top of the backing plate that the springs go on)
behind the springs themselves.

Ray R


On Thu, Sep 19, 2013 at 10:00 PM, Mark Durham <62vair at gmail.com> wrote:

> ray, odd shaped washer gizmos does n.ot translate. If you are talking
> about the the washers that go on top of the springs , yes just file
> them a bit. NAPA has kits of brake parts.
>