<VV> Turn signals

[MarK Durham]

There is a difference in resistance in the circuit. The most common is one
bulb is burnt out on one side, so the one bulb makes the flasher flash
faster.

If this is not the case, I would look for ground issues at the sockets
first. Remember there are the signal bulbs inside, too.

I had this happen to my 62 Coupe, and it was a problem between the socket
and housing for the rear tail lights. I drilled a small screw in the joint
and ran a screw in to provide continuity.

Some of these issues are sometimes hard to trace don. If you have mystery
gremlins, maybe someone else will respond with a similar problem,
otherwise, look for ground issues first, then work back thru the system
till you find the high resistane spot.
 Mark Durham
Hauser, Idaho
62 Monza coupe Red/Red 4 speed

On Thu, Dec 11, 2014 at 9:36 AM, Rnojunkmail at aol.com <
virtualvairs at corvair.org> wrote:
>
>
>
> Sent from my Verizon 4G LTE Smartphone
> Why does one turn signal blink faster thaN the other !on my 63 monza?
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>