<VV> gear lube leveling problem

J Bruce Weeks jbruceweeks at yahoo.com
Tue Jul 28 14:40:25 EDT 2015

I spent 15 minutes or so with the Brad Penn tech rep yesterday. Looks like their classic GL-4 is the way to go.  It's base is Pennsylvania crude which is far closer to what the transaxle was designed for than the modern synthetics.  I'll get some on order and change it out after Homecoming. Bruce Weeks
      From: "BobHelt at aol.com" <BobHelt at aol.com>
 To: jbruceweeks at yahoo.com; dkeillor at tconcepts.com 
Cc: virtualvairs at corvair.org 
 Sent: Friday, July 24, 2015 12:35 AM
 Subject: Re: <VV> gear lube leveling problem
 Bruce,that would not lubricate the splines where the tranny output shaft make contact with the splines of the diff input.Bob Helt In a message dated 7/23/2015 6:11:59 P.M. US Mountain Standard Time, virtualvairs at corvair.org writes:
Why not put a solid (no hole) gasket between them and put Redline in the trans, Amsoil in the diff?

Bruce Weeks


More information about the VirtualVairs mailing list