<VV> [SCG] OIL PAN

George Jones 65crownv8 at gmail.com
Thu Jun 11 11:18:15 EDT 2015


Bob,

Good info. Not sure that anyone missed anything though, as the topic was
centered around the oil pan, and I don't remember seeing any questions
about the gaskets. Not saying it isn't germane to the topic either.

Eagerly awaiting the International Convention.

George Jones
On Jun 11, 2015 10:08 AM, "BobHelt--- via VirtualVairs" <
virtualvairs at corvair.org> wrote:

> What you two experts seem to have missed is the corresponding and
> coincident change both in production and the field of the sealing gasket
> associated
> with the oil pan change. The old style pan used an (about) 1/8th inch
> thick cork gasket while the new pan used an (about) 1/16th inch thick PAPER
> gasket. This improved the pan's sealing immensely.
>
> Bob Helt
>
>
> In a message dated 6/10/2015 5:36:51 P.M. US Mountain Standard Time,
> whubbell at verizon.net writes:
>
> Yep,  that's correct, Jerry.
>
> The early pans have a sort of rectangle  shaped embossing between the bolt
> holes and Lates have sort of a diamond  shaped embossing between the bolt
> holes
>
>
> Bill Hubbell.
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>


More information about the VirtualVairs mailing list