<VV> Trunk splatter paint question

[Rod Murray]

Thx bob. I'll give that a try. 

Rod

Mobile device...Have a great day!

> On Jun 22, 2015, at 11:44 AM, hallgrenn <hallgrenn at aol.com> wrote:
> 
> Rod,
> When that has happened to me in the past it was the result of left over degreaser in seams and other crevices.  I ended up "drying" the soft spots with paper towels pushed into the soft paint areas until the towels stopped showing an oily residue.  Then touched up with Rustoleum paint.  At least 99% came out OK. 
> 
> Bo 
> 
> 
> 
> Sent on the new Sprint Network from my Samsung Galaxy S®4
> 
> 
> -------- Original message --------
> From: Rod Murray via VirtualVairs <virtualvairs at corvair.org> 
> Date: 06/22/2015 10:27 AM (GMT-05:00) 
> To: CORVAIR <virtualvairs at corvair.org> 
> Subject: Trunk splatter paint question 
> 
> Two weeks ago I cleaned, degreased, and re-painted my trunk. Final prep step was pre-spraying over rust areas w a hammerite rust cap primer.  Added the splatter when I thought that was dry. Final appearance looks nice however a few seam areas remain tacky despite ample drying time - I've even hit these areas this weekend w a portable garage light that kicks out lots of heat in an attempt to bake it dry. No such result.
> 
> Any thoughts or suggestions?
> 
> Thx
> Rod murray
> 66 monza 
> WPCC, 3RC
> 
> Mobile device...Have a great day!
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________