<VV> Oil adaptor question

[Ron Hinz]

That's fine and logical for when the valve is open but how does it flow when 
closed?  Then it will flow in one and out the other one next to it.

RonH

-----Original Message----- 
From: Jim Becker via VirtualVairs
Sent: Friday, May 1, 2015 3:22 PM
To: Bob ; virtualvairs at corvair.org
Subject: Re:  Oil adaptor question

The arrows in the shop manual show the oil going out the bottom and in the
top.  That makes sense from the perspective of basic heat exchangers and air
flow direction.

Jim Becker

-----Original Message----- 
From: Bob via VirtualVairs
Sent: Friday, May 01, 2015 4:09 PM
To: virtualvairs at corvair.org
Subject:  Oil adaptor question



Hi,

I'm in the process of installing an external oil cooler in the 3.1 engine in
my UltraVan.  That includes installing an oil thermostat which lets oil flow
to the cooler once it reaches temperature. On the "engine side" of the oil
thermostat it has two connectors, "motor in" and "motor out". These go down
to the oil cooler adaptor plate that I got from Clarks.



What I need to know is which of the 2 vertical connections on the block is
"oil in" and which is "oil out".



Thanks,

Bob

1966 Corsa 180 convertible

1968 UltraVan 404

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________