<VV> fuel sloshing

[Jay Maechtlen]

On 5/24/2015 3:56 PM, Bryan Blackwell wrote:
> A solution that worked pretty well for me was a removable baffle for the filler neck.  It looked like a short dipstick - about a foot long.  The outer end was bent so you couldn't push it down the neck.
>
> --Bryan
>
>> On May 22, 2015, at 11:52 PM, Jay Maechtlen via VirtualVairs <virtualvairs at corvair.org> wrote:
>>
>> The hose between the tank and filler neck is ok, the gas does come out the neck and around the cap.
>> There are streaks down the primer on the side to tell the story,
aha - so the baffle would ride way down in the fill tube near the tank 
itself?
Sound like a very good idea.

-- 
Jay Maechtlen


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com