<VV> #1 cold

N2VZD at aol.com N2VZD at aol.com
Sun Mar 13 18:19:00 EDT 2016

I have seen this with a worn housing bearing giving the shaft enough travel 
 to not open points in one position. IF opening points up a few thousandths 
cures  it , rebuild or replace that housing. If you grab the rotor and see 
a lot of  play , ya found it! otherwise , it may be a worn rubbing block on 
the  points.
Regards, Tim Colson

More information about the VirtualVairs mailing list