<VV> Winching onto trailer

[Dale Dewald]

On 5/2/2016 12:00, Bryan Blackwell wrote:
> Thanks Mike, but I don't have anything from the firewall to the rear engine mount on the '65, just the rear trailing arms and a 2x4 across to keep it braced.  Maybe t-hooks in the body holes?  I know they use those to tie the cars down with, but I can't recall if you can pull on them.  Of course with no powertrain it's a lot less weight, so maybe that would work ok anyway.  Sounds like the GB should be no problem.
>
> --Bryan
Hello Bryan,

If you have an old rear engine mount; 65 style mount normally, 66-9 
style mount upside down, then run a tow strap up from below and fit the 
loop around the mount.

Dale Dewald
Hancock, MI