<VV> 64 coupe rear window trim clips approximate location?

[Doug Mackintosh]

The clips on my 64 Coupe are about 7.5 inches to either side of center. I could not figure out how to give you a dimension from the side, so I found center and measured from there.
 <<Date: Mon, 10 Jul 2017 14:47:28 -0500From: Ignacio Valdes <ivaldes1 at gmail.com>
To: Virtual Vairs <virtualvairs at corvair.org>
Subject: <VV> 64 coupe rear window trim clips approximate location?
Message-ID:
    <CANPWqJHSFGo+AZR5_oNQGOr_EJ6DNBbOzWYevoQhuttKqo+B0Q at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi all, My 1964 coupe rear window used to leak. I had to keep putting in 3M
Window weld to make it stop. Now that it has stopped I want to put the trim
back on but have lost the location of the two rear upper trim clips in the
window weld. I would rather not dig around in the window weld to find them.
If anyone would be so kind as to measure from the side approximately the
position of the trim clips as circled in red in the picture I would
appreciate it.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4011.JPG
Type: image/jpeg
Size: 80647 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20170710/41caf5b6/attachment.jpe>

------------------------------>>-- Doug Mackintosh Corsa member since 1996 Corsa/NC member since 1996, Virtual Vairs member Corvair owner 1969-1971 and 1996-on