<VV> BRAKE UPGRADE

[Joel McGregor]

I have an Aamco grinder if anyone in the Dallas TX area needs to use it.

Joel McGregor

-------- Original message --------
From: English via VirtualVairs <virtualvairs at corvair.org>
Date: 11/19/17 10:17 AM (GMT-06:00)
To: virtualvairs at corvair.org
Subject: Re: <VV> BRAKE UPGRADE


Hard to find today because of the health hazard of the dust created , but all my brake shoes have been ground to fit the drums. This maximizes surface contact.  I used an old AAMCO shoe grinder . Most shoes , if you set them in the drums will not have much more than 50% contact area on older turned drums. They will wear in somewhat , but not much , not too quickly.Makes a big difference in stopping , especially FC's !Regards, Tim Colson