<VV> Concentric wheel spacer necessary?

[Matt Nall]

-----Original Message-----
From: James Cuneo

I found a wheel,  17x8 with nearly the perfect backspace, 5.25", 5x4.75" pattern. The center hole is larger than the hub so does not self center.
Spinning the wheel mounted on the front hub reveals maybe 1/8th of an inch run out. Is a spacer necessary, or are the studs enough to maintain the wheel securely centered? Street driver only.
======================================================================================


Most likely just fine... most don't use them.....  But I do!    Cheap on ebay...   Measure the hub's  outer Dia.  and the Wheel's inner dia.


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio

http://tinyurl.com/Matts-Tech-Pages