<VV> FC dash install

[Cliff Tibbitts]

> I am not real experienced with this either, but I recently removed an F/C
> dash with a powerglide so I do have one suggestion.  In the top holes where
> the small bolts go, you could insert a 5/32" roll pin.  It will just fit
> with no pressure.  Using the roll pins as a guide, you can then slide the
> instrument panel into place, secure the two bottom screws, then one at a
> time remove the roll pins from the back and insert the small screws.  the
> P/G shifter? now that's another problem altogether.


>
Cliff Tibbitts
cliff at tibweb.com