<VV> Engine identification.

Matt patiomatt at aol.com
Mon May 13 20:23:25 EDT 2019

And 164 CI    with 95 hp came with STEEL  pulleys..

Matt Nall
Sea Mtn., Or.
Sent from WinMail10

From: Bryan Blackwell via VirtualVairs
Sent: Monday, May 13, 2019 1:28 PM

You are correct that it's very uncommon to find a balancer on a short stroke engine. 

However, the rubber on a balancer can and does fail, it's quite common to find the late model cast pulley on an engine that should have a balancer.

To sum up, if you have an engine with a balancer and otherwise think it's a 164, that is very likely the case.  Keep in mind the 164 ci engine came out in '64.


> On May 13, 2019, at 4:14 PM, Hugo Miller via VirtualVairs <virtualvairs at corvair.org> wrote:
> Logically, I suppose an engine with a harmonic balancer could be early or late, since it is feasible to retro-fit a balancer to an early engine, but much less likely that someone would fit a pulley to a later engine instead of the balancer.

More information about the VirtualVairs mailing list