<VV> DO IT TO YOURSELF VALVE JOB

[N2VZD TIM]

IF the head looks clean inside , I used to put fine valve grind compound on the valve , put a little oil on the stem , run the valve against the seat a few times with a drill pulling it in place. Checking it for even surface. Then wash things well , reassemble and run it .That was Cob Job times on my own stuff years ago. (barn floor stuff)
I would like to hear any more negatives (proven if possible ) on full fin cylinders. I have built several nice motors with them thinking I was doing the best job. Only one that bit Me so far  was severely overheated.  Maybe I must rethink things?Regards, Tim Colson  

http://cnycorvair.com/Little_Corvair_Shop.php