[1969] EFI on a 69 engine

[Steven Brown]

This is going somewhere but there's little traffic. You might try virtualvairs or one of the other forums.

Steve

On Jan 23, 2014 12:17 PM, hihal6 at gmail.com wrote:
>
> Hi everyone; 
> I haven't seen a post to the Sixty Nine list for some time so I'm not sure 
> if this one is actually going somewhere or not! 
>
> I have ordered the parts to convert my 69 Coupe to throttle body fuel 
> injection and DIS. My powertrain is a 110 PG with 3.27 gearing. All smog 
> equipment has been removed. The engine is very low mileage (for a car this 
> old) and has never been apart except for carb rebuilds, o-ring replacement 
> etc. The fuel injection and ignition setup is the kit offered by Ted Brown 
> in South Carolina and is based on 1990's technology. He has been building 
> and improving on this system for a few years now. 
>
> Has anyone else done this conversion on a 69? I would appreciate any 
> helpful hints or observations if you have done this conversion on any 
> Corvair, but especially a 69. 
>
> Thanks, 
>
> Wade Halsey in Southern Ohio 
> _______________________________________________ 
> This message was sent by the 1969 mailing list, all copyrights are the property 
> of the writer, please attribute properly. For help, mailto:1969-help at corvair.org 
> This list sponsored by the Corvair Society of America, http://www.corvair.org/ 
> Membership in CORSA is strongly encouraged for 1969 Group members. 
> Post messages to: 1969 at corvair.org 
> Change your options: http://www.vv.corvair.org/mailman/listinfo/1969