[FC] possible source for new custom springs

[Kent Sullivan]

The Corvair vendors carry decent repro springs--I have used them with
good success.

If you want something custom made or something made to exact factory
specs, try Coil Spring Specialties (www.coilsprings.com). They made some
nice springs for my '66 coupe and the owner claims to have all Corvair
spring specs.

--Kent
-----Original Message-----
From: corvanatics-admin@corvair.org
[mailto:corvanatics-admin@corvair.org] On Behalf Of * Greenbrier Goon *
Sent: Wednesday, February 05, 2003 10:45 PM
To: corvanatics@corvair.org
Subject: Re: [FC] possible source for new custom springs


I contacted them about a year ago about the same thing.  Sounds like
they 
can make anything.

Charles

Greenbrier World:
http://www.c-zone.net/northgte/greenbrier.htm

1963 Greenbrier PG (soon to be 4 speed)
1963 Corvair 95 4 Speed (soon to be scrap)





>From: Woohey@aol.com
>Reply-To: corvanatics@corvair.org
>To: corvanatics@corvair.org
>Subject: [FC] possible source for new custom springs
>Date: Wed, 05 Feb 2003 12:22:12 -0500
>
>attached is an email from eaton springs, may be source for new springs,
>although not necessairly cheap.
>
>i have old corvanantics w/factory specs for front and rear springs, but

>was
>wondering if anyone has specific recs, especially rear springs for 
>greenbrier, i will provide specs to eaton and let everyone know what
their 
>prices are
>
>So, if anyone has specific specs they would like me to check let me 
>know
>
>Also, if anyone has suggestions for specs for best greenbrier 
>applications
>let me know, as stated i have old corvanantics spec sheet so i only
need to 
>know application if its one of those
>
>Name: KEITH GRAHAM
>Phone:
>Fax:
>Email: woohey@aol.com
>
>i am looking for repplacement rear springs for a corvair fc truck, can
>provide factory specs, such as diameter, # coils, etc if needed
>
>also a set of early mustang v-8 springs for front
>
>also, do you offer volume discounts, am active member of local and 
>national
>corvair club, we are unable to find rear replacement springs for
corvair 
>trucks and there may be good demand if available, can mail or fax 
>specifications sheet if needed
>
>thanks
>keith
>
>
>
>Keith,
>
>We do not have the specs, so if you could send them we will see if we 
>can
>make them.
>
>We do not offer volume discounts, sorry.
>
>We do have all the specs for Mustang springs. What year, model and 
>engine?
>
>Stock Mustang springs are 139.95 a pair and altered springs are 159.95 
>a
>pair plus shipping.
>
>In order to provide shipping costs we must have the "Ship To" Zip Code.
>
>We accept Visa, Master Card, American Express, Cash, Checks, Money 
>Orders
>and Wire Transfers.
>
>Due to the high volume of e-mails we receive, we request you attach 
>this
>e-mail to all correspondence. Sorry, but failure to do so may mean you
will 
>not hear back from us.
>
>Thank You
>Mike
>phone 1-313-963-3839
>fax       1-313-963-7047
>www.eatonsprings.com _______________________________________________
>Corvanatics mailing list
>Corvanatics@corvair.org
>http://www.vv.corvair.org/mailman/listinfo/corvanatics


_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail
_______________________________________________
Corvanatics mailing list
Corvanatics@corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics